Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

Product filters Product filters

Rail Components

4.48 (5.42 Inc Vat)
This item is part of the Photogenic MasterRail System. It is an auxiliary weight of 1/2 lb, which can be added to the AD54B Weight Adapter. It is used for a...
In stock
+

Minimum quantity for "Photogenic Weight for AD54B - 1/2 lb" is 1.


5.49 (6.64 Inc Vat)
The ARRI S2.FP544 Kit for Screw Connection features a 0.1” (3mm) long M10 bolt to mount lighting fixtures directly on to an X-FLY 20 Pantograph.
In stock
+

Minimum quantity for "ARRI S2.FP544 Kit for Screw Connection" is 1.


5.77 (6.98 Inc Vat)
Aligning Connectors For Fixed Rails. A pair of clamp plates with screws to join two fixed rails together by clamping across the junction on the upper guide,...
In stock
+

Minimum quantity for "Manfrotto Rail Connector" is 1.


6.42 (7.77 Inc Vat)
For Light Mover Rail System
In stock
+

Minimum quantity for "Delta 1 Safety Cable - 18"" is 1.


6.42 (7.77 Inc Vat)
Bracket for ceiling attachment of the rail section of a Bogen Rail System. It is advisable to pre-assemble these brackets onto the rails at the ground level...
In stock
+

Minimum quantity for "Manfrotto Mounting Bracket for Ceiling Fixture" is 1.


6.42 (7.77 Inc Vat)
The ARRI S2.RBF01 Flat Plate is a spacer plate that can be used to support to one T5, T6, T8 type rail, or a pipe when combined with other ceiling brackets....
In stock
+

Minimum quantity for "ARRI S2.RBF01 Flat Plate for ARRI Rail or Pipe" is 1.


6.42 (7.77 Inc Vat)
For Photogenic AD91 Suspension System
To Mount 3/8" Receivers to Hardware
In stock
+

Minimum quantity for "Photogenic 3/8" (0.375mm) Diameter Stud with 1/4"-16 (0.375mm) Male Thread" is 1.


6.42 (7.77 Inc Vat)
For Use with T5, T6, & T8 Rails
In stock
+

Minimum quantity for "ARRI S2.PB001 Pipe Clamp" is 1.


7.73 (9.35 Inc Vat)
These attach to the holes on the ends of a rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages. IMPORTANT: must be...
In stock
+

Minimum quantity for "Manfrotto End Stops with Cable Carriages - Set of 4" is 1.


8.07 (9.76 Inc Vat)
The ARRI S2.RBC01 Rail Clamp Kit can be used to install ARRI brackets onto T5, T6, or T8 type rails. The clamps are made of steel and are zinc plated. The...
In stock
+

Minimum quantity for "ARRI S2.RBC01 Rail Clamp Kit for ARRI Brackets" is 1.


7.38 (8.93 Inc Vat)
For Telescopic Post or Top Pantograph
Failsafe System for Grip Equipment
Holds up to 44 lbs (22kg)
In stock
+

Minimum quantity for "Manfrotto FF3276 Steel Safety Cable" is 1.


9.00 (10.89 Inc Vat)
This item is part of the Photogenic MasterRail Sytem. This 3/8 inch- 16 threaded rod is 6 feet long, and is used to adapt the MasterRail System for use with...
In stock
+

Minimum quantity for "Photogenic Threaded Rod - 3/8" Thread - 6'" is 1.